Instructions : Nano4-Plastic

How to apply:

  • Before you apply, make sure the surface is clean, dry and free of residues.
  • Do not dilute Nano4-Plastic with water as it is not required.
  • Once the surface is clean and dry, apply Nano4-Preclean product by spraying 15cm away (on a small area 30cm X 30cm at a time) and rub the surface with a micro fibre cloth in a circular motion. Nano4-Preclean is used to remove any previous chemical residues to ensure the glossy surface is clean.
  • Now apply Nano4-Plastic by spraying 15cm away (on a small area 30cm X 30cm at a time) and rub on the target surface with a new micro fibre cloth in a circular motion. Once sprayed, make sure you wipe it straight away and don’t let it dry up. Give it a good polish and continue until complete.
  • Nano4-Plastic takes about 12-24 hours (occurs under ambient conditions) to be fully cured. In case of higher atmospheric humidity longer curing times are necessary.
  • Protection last up to 5 years for new stainless steel surfaces provided application is made in accordance to instructions. However, you may need to re-apply earlier for optimum result.

 

Available in sizes

100ml and 200ml. For bottles larger than 200ml please contact us directly.

 

Coverage

One litre can cover up to 200m2 where the application is made by using a HVLP spray gun.

 

Precautions - DO NOT SWALLOW

  • Always apply in a well ventilated area

  • Apply when surface temperature is between 5-30°C

  • Do not let products dry up before polishing

  • Avoid moisture contact with the surface after application until fully cured for 24 hours for optimum results

  • Wear gloves and protective clothing

  • Avoid applying in windy conditions

  • Wash hands after application

  • Highly flammable

  • Keep ignition sources away - Do not smoke

  • Keep out of reach of children

  • PH Value 14 or above cleaner can destroy the effect

  • Nano4-Plastic does not protect against acid, etching, wear and high water pressure 50 bar and above

 

First Aid Measures

If inhaled: Supply fresh air; consult doctor in case of complaints.

If contact with skin is made: Immediately rinse with water.

If contact with eyes are made: Rinse opened eye for several minutes (10-15) under running water. If symptoms persist, consult a doctor.

If swallowed: Rinse out mouth and then drink plenty of water.

Do not induce vomiting; call for medical help immediately.

A person vomiting while laying on their back should be turned onto their side.

If Victim is vomiting, bring head in low position (increased Danger of aspiration / perforation)

 

Storage

Store in a cool and dry location.

 

Chemical Composition

Ethanol                                                        (C2H60)                  98% w/w

Silicon Dioxide                                            (SiO2)                    0.4% w/w

Reaction Mass of Dimethyl Adipate       (C8H14O4)               0.2% w/w

Dimethyl Glutarate                                    (C7H12O4)               0.4% w/w

Methyl Ethyl Ketone                                  (C2H8O)                 1% w/w