How to use Nano products?

Porous Surfaces

Porous Surfaces Include:

Stone

Concrete

Wood

Brick

Grout

Instructions for
Porous Surfaces

Read these instructions through once before you start

We recommend doing a test on a small area first, allow it to cure for 24-48 hours to determine the desired results

Before you apply, make sure the surface is clean and dry.

Do not dilute Nano4Life products with water, as it's not required.

You can use a brush, paint roller, spray on or HVLP spray gun for best and economical application

For the best results apply generously on the surface and make sure it’s wet.

Nano4Life products take about 24-48 hours (at 20^oC) to be fully cured. The time required for curing may vary depending on ambient temperatures.

We recommend applying at least two coats (wet to wet) or more, depending on the absorption (some surfaces may be able to get away with one coat.)

Products for
Porous Surfaces

Nano4-Stone

Nano4-Wooden Deck

Nano4-Grout

Non-Porous Surfaces

Non-Porous Surfaces Include:

Glass

Ceramic

Porcelain

Chrome Metal

Fibre Glass

Plastics

Marble

Any smooth/glossy surfaces

Instructions for
Non-Porous Surfaces

Read these instructions through once before you start

Before you apply, make sure the surface is clean and dry.

Do not dilute Nano4Life products with water as it's not required.

Once the surface is clean and dry, apply the Nano4-Preclean product by spraying 15cm away (on a small area 30cm x 30cm at a time) and rub the surface with a micro fibre cloth in a circular motion.

Nano4-Preclean is used to remove any previous chemical residues to ensure a clean glossy surface.

Now spray your Nano4Life product by spraying 15cm away (on a small area 30cm x 30cm at a time) and rub on the target surface with a new micro fibre cloth in a circular motion. Once sprayed make sure you wipe it straight away, don’t let it dry up. Give it a good polish, continue until complete.

You can use a spray on or HVLP spray gun for best and economical application.

Nano4Life products take about 24 hours (occurs under ambient conditions) to be fully cured. In case of higher atmospheric humidity longer curing times are necessary.

Products for
Non-Porous Surfaces

Nano4-Car Glass

Nano4-Car Protect

Nano4-Wheel Rims

Nano4-Plastic

Nano4-Glass Ceramic

Nano4-Chrome Metal

Nano4-Ship Inox

Nano4-Yacht

Fibrous Surfaces

Fibrous Surfaces Include:

Carpets

Car Seats

Shoes

Bags

Leather

Couches

Textiles

Fabrics

Instructions for
Fibrous Surfaces

Read these instructions through once before you start.

We recommend doing a test on a small area first, allow it to cure for 24-48 hours to determine the desired results.

Before you apply, make sure the surface is clean and dry.

Do not dilute Nano4Life products with water as it's not required.

Spray generously (15 cm away) on the surface and make sure it’s wet. A second coat may be required depending on the thickness and absorption of the textile. Most textiles may be able to get away with one coat.

Nano4Life products take about 24-48 hours (at 20^oC) to be fully cured. The time required for curing may vary depending on ambient temperatures.