Instructions : Nano4-Glass Ceramic

How to apply:

  • Before you apply, make sure the surface is clean, dry and free of residues.
  • Do not dilute Nano4-Glass Ceramic with water as it is not required.
  • Once the surface is clean and dry, apply Nano4-Preclean product by spraying 15cm away (on a small area 30cm x 30cm at a time) and rub the surface with a micro fibre cloth in a circular motion. Nano4-Preclean is used to remove any previous chemical residues to ensure the glossy surface is clean.
  • Now apply Nano4-Glass Ceramic by spraying 15cm away (on a small area 30cm x 30cm at a time) and rub on the target surface with a new micro fibre cloth in a circular motion. Once sprayed, make sure you wipe it straight away and don’t let it dry up. Give it a good polish and continue until complete.
  • Nano4-Glass Ceramic takes about 12-24 hours (occurs under ambient conditions) to be fully cured. In case of higher atmospheric humidity longer curing times are necessary.
  • Protection last up to 5 years for new glass provided application is made in accordance to instructions. However, you may need to re-apply earlier for optimum result depending on each glass surfaces.

 

Available in sizes:

100ml and 200ml. For bottles larger than 200ml please contact us directly.

 

Coverage

One litre can cover up to 200m2 where the application is made by using a HVLP spray gun.

 

Precautions - DO NOT SWALLOW

  • Always apply in a well ventilated area

  • Apply when surface temperature is between 5-30°C

  • Do not let products dry up before polishing

  • Avoid moisture contact with the surface after application until fully cured for 24 hours for optimum results

  • Wear gloves and protective clothing

  • Avoid applying in windy conditions

  • Wash hands after application

  • Highly flammable

  • Keep ignition sources away - Do not smoke

  • Keep out of reach of children

  • PH Value 14 or above cleaner can destroy the effect

  • Nano4-Glass Ceramic does not protect against acid, etching, wear and high water pressure 50 bar and above

 

First Aid Measures

If inhaled: Supply fresh air; consult doctor in case of complaints.

If contact with skin is made: Immediately rinse with water.

If contact with eyes are made: Rinse opened eye for several minutes (10-15) under running water. If symptoms persist, consult a doctor.

If swallowed: Rinse out mouth and then drink plenty of water.

Do not induce vomiting; call for medical help immediately.

A person vomiting while laying on their back should be turned onto their side.

If Victim is vomiting, bring head in low position (increased Danger of aspiration / perforation)

 

Storage

Store in a cool and dry location.

 

Chemical Composition

Ethanol                                                        (C2H60)                  98% w/w

Silicon Dioxide                                            (SiO2)                    0.4% w/w

Reaction Mass of Dimethyl Adipate       (C8H14O4)               0.2% w/w

Dimethyl Glutarate                                    (C7H12O4)               0.4% w/w

Methyl Ethyl Ketone                                  (C2H8O)                 1% w/w