100ml and 200ml. For bottles larger than 200ml please contact us directly.
One litre can cover up to 200m2 where the application is made by using a HVLP spray gun.
Always apply in a well ventilated area
Apply when surface temperature is between 5-30°C
Do not let products dry up before polishing
Avoid moisture contact with the surface after application until fully cured for 24 hours for optimum results
Wear gloves and protective clothing
Avoid applying in windy conditions
Wash hands after application
Keep ignition sources away - Do not smoke
Keep out of reach of children
PH Value 14 or above cleaner can destroy the effect
Nano4-Bathcare does not protect against acid, etching, wear and high water pressure 50 bar and above
If inhaled: Supply fresh air; consult doctor in case of complaints.
If contact with skin is made: Immediately rinse with water.
If contact with eyes are made: Rinse opened eye for several minutes (10-15) under running water. If symptoms persist, consult a doctor.
If swallowed: Rinse out mouth and then drink plenty of water.
Do not induce vomiting; call for medical help immediately.
A person vomiting while laying on their back should be turned onto their side.
If Victim is vomiting, bring head in low position (increased Danger of aspiration / perforation)
Store in a cool and dry location.
Ethanol (C2H60) 98% w/w
Silicon Dioxide (SiO2) 0.4% w/w
Reaction Mass of Dimethyl Adipate (C8H14O4) 0.2% w/w
Dimethyl Glutarate (C7H12O4) 0.4% w/w
Methyl Ethyl Ketone (C2H8O) 1% w/w