Nano4-Stone


Free Shipping over $150


Collections: Water Repellent Spray Products, Water Repellent Spray Products DIY


For bottles larger than 20L please contact us directly

Disclaimer: Photographs are for illustration purposes and to be used as an indication only.

Nano4-Stone

Unprotected concrete driveways or stone pavements can easily be stained and water can cause the surface to weaken and crack while promote moss & fungi growth which leaves it unsightful. To avoid the disappointment, it is worthwhile to invest in a reliable sealer to prevent this from happening

Nano4-Stone will protect against moss & fungi growth and help remove stains from accidental spills. It will penetrate, seal and protect the surface and keeping it looking new for many years to come

Where can I apply it?

  • Pool pavements (Indoor or Outdoor)
  • Concrete driveways
  • Stone floors and walls
  • Porous tiles
  • Footpaths
  • Terracotta
  • Any natural stones such as Flagstone, Sandstone, Granite, Limestone, Quartzite etc.

Why choose Nano4-Stone over other products?

Safer - Our odourless water-based penetrating sealer is 100% natural eco-friendly formula reduces the health risks for Australian families when compared to other products on the market.

Greener – Our product is made of quartz sand also known as liquid glass. The natural ingredients are formulated with the environment in mind, therefore supporting efforts to make our planet a sustainable one.

Smarter Nano4-Stone offers a full range protection from water repellent, UV stable, abrasion resistant, slip resistant and resistant to pressure wash (50 bar and below). With its high quality of ingredients it also helps minimise efflorescence (salt crystals) that leave the surface unsightful and may be costly to clean. Nano4-Stone can help you make a smarter choice for your stone floors and walls.

Other features and benefits

  • Non-toxic
  • Stain resistant
  • Invisible coating
  • Easy to clean
  • Reduce moss & fungi growth
  • Curing time 24 – 48 hours
  • Protection up to 8 years
  • Chemical resistant
PRODUCT SIZE COVERAGE EXAMPLE ITEMS TO SEAL AND PROTECT
1 Litre Bottle 5m2 – 33m2 Small driveways and stone pavement
4 Litre Bottle 20m2 – 132m2 Driveways and stone pavement
20 Litre Drum 100m2 – 660m2 Larger drive ways and commercial jobs

Recommended Applications

NATURAL STONE NUMBER OF COATS
Flagstone, Sandstone, Quartzite, Slate, Concrete 1 wet coat (Preferably with a brush to help penetrate the surface better)
Bluestone, Granite, Travertine 2 coats. Apply the 2nd coat before the 1st coat dries while it’s still wet (usually within 5 – 10 minutes). Please note that these stone may not have the “hydrophobic” effect, however, the surface is still protected.



EASY TO APPLY

STEP 1. We recommend doing a test on a small area first; allow it to cure for 24 – 48 hours to determine the desired results.

STEP 2. Before you apply, make sure the surface is clean, dry and free of residues. Do not dilute Nano4-Stone with water, as it is not required.

STEP 3. You can use a brush, spray on or HVLP spray gun for best and economical installation. For the best results apply generously on the surface and make sure it’s wet. We recommend applying at least two coats (wet to wet) or more, depending on the absorption. Apply the 2nd coat before the 1st coat dries while it’s still wet (usually within 3 – 5 minutes). Some surfaces may be able to get away with one wet coat.

STEP 4. Nano4-Stone takes about 24 – 48 hours (at 20℃) to be fully cured. The time required for curing may vary depending on ambient temperatures

Nano4-Stone offers a long life protection of up to 8 years for new surface and when applied correctly according to instructions and maintained according to Nano4Life’s maintenance guide. However, you may need to re-apply earlier depending on the harshness of the environment and on high foot traffic areas.

TIPS

  • For the best results apply generously on the surface and make sure the coatings are wet.

PRECAUTIONS – DO NOT SWALLOW

  • Apply when surface temperature is between 5 – 30℃
  • Avoid moisture contact with the surface after application until fully cured for 24 – 48 hours for optimum results
  • Protect surrounding after application to avoid damage on freshly coated surfaces
  • Wear gloves and protective clothing
  • If using spray on, avoid applying in windy conditions
  • Wash hands after application
  • Store in a cool and dry location away from direct sunlight
  • Keep out of reach of children
  • PH Value 14 or above cleaner can destroy the effect
  • Nano4-Stone does not protect against acid, etching, wear and high water pressure 50 bar and above

CHEMICAL COMPOSITION

Demineralised Water (H2O) >94%
Silicon Dioxide (SiO2) <6%



Related Items